How Can I Change the Passowrd for My Tp-link Wifi Router

Download Article

Download Article

This wikiHow teaches you how to change a TP Link router'south wireless network password. Some newer routers have dual ring wireless connections which provide a wireless network at 2.4GHz and 5GHz. Sometimes yous can set a divide password for both networks. A two.4GHz network has a slower internet speed, simply greater range. A 5GHz network has faster internet speeds, merely shorter range. The web interface for each wireless router is different, so keep in mind that the carte options may differ slightly from what is listed here.

1. i

2. 2

   Enter 192.168.1.1 into your browser's address bar. This is the TP Link router'due south default IP address. It is as well the address for the router's web interface.

   • If the address above is incorrect, consult the user's manual to come across what the default IP address is.

   Advertisement

3. 3

   Enter the router'southward username and password. If you haven't inverse these from the mill settings, the username and password are both admin.

   • If you lot did change the username and/or countersign but no longer call back them, you'll accept to reset your router before continuing.

4. four

   Click Interface Setup . It's the second tab at the pinnacle of the folio.^[1]

5. v

   Click Wireless . It'due south beneath the main tabs at the top of the page.

   • If y'all are using a dual-ring router, you can click Wireless 2.four GHz or Wireless v GHz to gear up a separate password for each network.

6. 6

   Click Security (Broadcom Modem Only). It's below "Wireless" in the sidebar menu to the left.

7. 7

   Select "WPA-PSK/WPA2-PSK Mixed Mode" or "WPA2-PSK (best)". Use the drib-downward menu next to "Authentication Type" or "Network hallmark" to select "WPA-PSK/WPA2-PSK (Mixed Mode)" or "WPA2-PSK (best)", depending on which modem model you have.

   • Alternatively, you lot can select "WEP", but this method isn't as secure.

8. 8

   Enter your new wireless password. It goes in the field adjacent to "Pre-shared key" in the box labeled "WPA-PSK/WPA2-PSK Mixed Way".

   • If y'all are using WEP, enter your password next to "Key 1".

9. nine

   Click Salvage or Apply/Save . It's at the bottom of the page.

10. 10

    Click Advanced Setup or Direction . For Trendchip modems, Avant-garde Setup is the tertiary tab at the peak of the page. On Broadcom modems, Management is in the sidebar carte du jour to the left.

11. xi

    Click SysRestart or Reboot . On Trendchip modems, SysRestart is beneath the main tabs at the top of the page. On Broadcom modems, Reboot is below "Direction" in the sidebar menu to the left.

12. 12

    Select the option to restart with current settings. Information technology's in the center of the page. This reboots your modem and applies your settings.

    Advert

1. ane

   Make certain your computer is continued to the Internet. You'll need to be connected to the Internet in social club to access the router's page.

   • If your wireless connectedness isn't working properly, you can connect directly to the router.

2. ii

   Open a web browser. To access the router's page, yous'll enter the TP Link router address in your browser's address bar.

3. 3

   Enter 192.168.1.one into your browser's address bar. This is the TP Link router's default IP address. It is also the address for the router's spider web interface.^[2]

   • If the address above is incorrect, consult the user'southward manual to encounter what the default IP address is.

4. 4

   Enter the router'due south username and password. If y'all haven't changed these from the manufactory settings, the username and countersign are both admin.

   • If y'all did modify the username and/or countersign but no longer remember them, you'll take to reset your router before continuing.

5. 5

   Click Wireless . It's on the left side of the page.^[3]

6. 6

   Click Wireless Settings or Wireless Security . This option is below the Wireless carte du jour on the left side of the page.

7. seven

   Ensure "Enable Wireless Security" is checked . It's the starting time checkbox after the line-suspension virtually halfway down the page. If you don't come across this option, move on to the next step.

8. eight

   Select WPA-PSK/WPA2-PSK . Utilise the drop-downwardly next to "Security type" to select "WPA-PSK/WPA2-PSK".

   • Alternatively, you lot can select "WEP" in the Security Blazon drop-downward bill of fare, but this method is not every bit secure.

9. 9

   Type in a new password. This goes into the countersign field labeled "PSK Countersign."

   • If y'all are using WEP, enter your password side by side to "Key 1"

10. 10

    Click Save . This push button is at the bottom of the folio.

11. 11

    Click OK when prompted. This volition salvage your new password, though you'll need to reboot your router for the changes to take identify.

12. 12

    Click System Tools . It'south at the bottom of the column of options that is on the left side of the page.

13. thirteen

    Click Reboot . You'll notice this near the bottom of the System Tools bill of fare.

14. xiv

    Click OK when prompted. This volition reboot your router. When it comes back online, your password will be in outcome.

    • You will need to reconnect each of your previously continued devices to the router with the new countersign.

    Advertisement

1. 1

   Make sure your computer is connected to the Net. You'll need to exist continued to the Internet in order to admission the router'southward folio.

   • If your wireless connexion isn't working properly, you lot tin connect directly to the router.

2. 2

   Open a web browser. To access the router's page, you'll enter the TP Link router accost in your browser'due south accost bar.

3. 3

   Enter 192.168.1.1 into your browser'south address bar. This is the TP Link router's default IP accost. Information technology is also the address for the router's web interface.

   • If the address above is incorrect, consult the user'south manual to run across what the default IP address is.

4. 4

   Enter the router's username and countersign. If you haven't changed these from the factory settings, the username and countersign are both admin.

   • If you did change the username and/or password merely no longer remember them, you'll accept to reset your router before standing.

5. 5

   Click the Basic tab. It's the center tab at the top of the page.

6. 6

   Click Wireless . It's in the sidebar carte du jour to the left. This displays the Wireless settings.

   • If you are using a dual band router, you tin can click Wireless 2.four GHz or Wireless 5 GHz to set a separate countersign for each network.

7. seven

   Enter your Wireless Network Name. Enter this in the field side by side to "Wireless Network Name (SSID). This is the proper noun that will be displayed when wireless devices search for your wireless network .

8. 8

   Enter your new wireless password. This goes in the field side by side to "Countersign".

9. 9

   Click Relieve . It's the green push at the bottom of the page.

   Advertisement

Add New Question

• Question

  How do I go the IP address if it is not written on my router?

  

  Go to the search bar, select "run" and blazon in "cmd" and once the command box opens type "ipconfig/all."

• Question

  Can I disable a TP LINK ii login countersign completely?

  

  Yes, you can.

• Question

  How do I alter my router password?

  

  You have to log into your router via your computer: the IP address is typically 192.168.0.1, just it may be different for other routers. Once yous accept logged in, go to your router settings. If you don't know the password for your router, the default is Admin or Administrator.

• Question

  How do I modify my WiFi name?

  

  Go to 192.168.0.1 or 192.168.1.1. Type "admin" as the username and the countersign. Go to Basic Settings. Change the proper noun.

• Question

  What can I practise if my laptop is not connecting to WiFi?

  

  Plow off the WiFi and try to reconnect. If this doesn't work, attempt restarting your computer.

• Question

  When I printing the reset button, the WiFi disconnects. How can I get it back on the telephone?

  

  Add the connectedness credentials manually with a security password if applicable and click on the connect button.

• Question

  How do I modify my WiFi password on my TP Link router if I forgot both the username and password?

  

  Difficult reset. At the back, you'll run into a pocket-size pigsty; poke it with a pen tip until y'all encounter all the LEDs blink at the same time. This will reset your router configuration, setting it to the factory defaults of username: admin and password: admin. Notation that all of your router'south data--including SSID and WiFi password--volition be erased and demand to exist reprogrammed.

Ask a Question

200 characters left

Include your electronic mail accost to go a message when this question is answered.

Submit

Advertising

Video

• Avoid resetting your router unless y'all absolutely accept to. If you lot practise have to reset your router, create a new username and password immediately.

Ad

• Don't change router settings that you aren't familiar with.

Advertising

Nearly This Article

Article Summary X

one. Connect your router to the cyberspace.
2. Open up a spider web browser and enter "192.168.1.ane" in the address bar.
3. Enter "admin" equally the router'southward username and password.
iv. Click Wireless in the sidebar menu to the left.
five. Click Wireless Settings/Security below "Wireless".
6. Select or click "WPA-PSK/WPA2-PSK" every bit the Security Type.
seven. Enter your password adjacent to "Countersign" or "PSK Passphrase".
8. Click Save.
9. Click System Tools.
x. Click Reboot.
xi. Click Ok and reboot your modem.

Did this summary assistance you?

Thanks to all authors for creating a folio that has been read 868,735 times.

Is this article up to date?

mcdowellantiou.blogspot.com

Source: https://www.wikihow.com/Change-a-TP-Link-Wireless-Password

Share this post